Description

DGEN – Digital Macro Vickers Hardness Tester with 5kgf, 10kgf, 30kgf and 50kgf loads, Motorized Turret and Built-In Printer.

DGEN – Digital Macro Vickers Hardness Tester The measurements are made through the eyepiece. This system is equipped with an encoder. After using the micrometers to measure the diagonals, the system will transmit your readings from the eyepiece into the system through a single click of a button. The system will generate your hardness reading and display it on the LCD.

Standard Configuration Includes: Vickers Hardness Tester, 10X Digital Micrometer eyepiece, 10X and 20X Objective Lenses, Vickers Diamond indenter, NIST Traceable Vickers Test Block, Motorized Turret, X-Y Testing Stage, 3-Stage Fixtures, Power Cable, Dust Proof Cover, Instruction Manual, Hardness Conversion Table, Certificate of Quality, Warranty Card and Accessory Case.

	NG-5DGEN	NG10DGEN	NG30DGEN	NG50DGEN
Testing Forces	300g (1.96N), 500g (4.9N), 1kg (9.8N), 2kg (19.6N), 3kg (29.4N), 5kg (49N)	500g (4.9N), 1kg (9.8N), 2kg (19.6N), 3kg (29.4N), 5kg (49N), 10kg (98N)	1kg (9.8N), 2kg (19.6N), 3kg (29.4N), 5kg (49N), 10kg (98N), 30kg (294N)	1kg (9.8N), 2kg (19.6N), 3kg (29.4N), 5kg (49N), 10kg (98N), 30kg (294N), 50kg (490N)
Vickers Scales	HV0.3, HV1, HV2, HV3, HV5	HV1, HV2, HV3, HV5, HV10	HV1, HV2, HV3, HV5, HV10, HV20, HV30	HV1, HV2, HV5, HV10, HV20, HV30 HV50
Conversion	Conversion of Vickers value to: HRA, HRC, HRD, HK, HBS, H15N, H30N, H45N, H15T, H30T, H45T
Minimum Measuring Unit	0.01μm
Vickers Value Range	HV1 - HV4000
Vickers Value	Displayed on the instruments on the LCD screen
Magnification	100X (for observation), 200X (for measurement), and can be extended to 400X
Loading Method	Automatically - Load, dwell and unload the testing force
Duration	1-99 seconds
Turret	Automatic Motorized Turret - Objective Lenses and Indenter
Maximum Height of Specimen	8.5cm	16cm
Maximum Depth of Specimen	11cm	30cm
Light Source	LED Cold light source (no heat generated from light source - service life of light source can reach 100,000 hours)
Stage	Dimensions of the X-Y Testing table are 10cmx10cm Maximum Travel Range 2.5cm x 2.5cm Moving Resolution Ratio 0.1mm
Data Output	Built-in Printer: Hardness Value, the max, and min value, testing time, and average value
Power Source	110V/60Hz/1Ph
Overall Dimensions	40.5cmx29cmx48cm (LxWxH)
Weight	45kg	53cmx22cmx58cm (LxWxH)
Warranty	5 Years